2013 N4
(e-mail: GusakovaLV@mail.ru)
A.D. Kulinskiy, Joint-stock company "Yeisky Machine Tool Plant" (e-mail: GusakovaLV@mail.ru)
A.P. Babichev, Doctor of Sciences, Corresponding member of PATH, Professor, Don State
Technical University (Rostov-on-Don) (e-mail: vibrotech@mail.ru)
L.V. Gusakova, Doctor of Sciences, Professor, Rostov State Transport University (Rostov-on-Don)
(e-mail: GusakovaLV@mail.ru)
DEVELOPMENT OF HIGH-GRINDING AND VIBRATIONS TOOLS
The article deals with the design developed by a multi-sectoral different grit grinding wheel and abrasive
tools containing in its composition iodine compounds. We consider the options developed new technological
schemes of processing vibroimpact long parts of "targeted" and piecemeal vibroimpact stripping and finishing
and processing power complex shapes. The conditions to achieve the required quality parameters.
Key words: grinding, abrasives, tools, preparation, detail, strengthening, vibro-treatment.
_________________________
A.V. Kirichek, Doctor of Sciences, Professor, Southwest State University (Kursk)
(e-mail: avkswsu@mail.ru)
D.L. Solovyev, Doctor of Sciences, Professor, Murom Institute (Branch) of the Vladimir State
University (e-mail: murstin@yandex.ru)
A.A. Nikolaevich, Doctor of Sciences, Professor, Belgorod State University (е-mail: af@au.ru)
A. Schubert, Doctor-Ingineer, Professor, Technical Universiy Chemnitz, Institut of Machine tools
and Production Processes (e-mail: henning.zeidler@mb.tu-chemnitz.de)
H. Zeidler, Doctor-Ingineer, Professor, Technical Universiy Chemnitz, Institut of Machine tools and
Production Processes (e-mail: henning.zeidler@mb.tu-chemnitz.de
PROSPECTS OF CREATING THE MULTILEVEL SURFACE LAYER BY THE DEFORMATION
HARDENING
Are represented the versions of creation by the surface plastic deformation of the multilevel reinforced
surface layer, which combines low roughness, high level of surface hardness and large depth of hardening with
a sufficient resource of plasticity.
Key words: surface plastic deformation, static effect, kick effect, depth of the strengthened stratum.
_________________________
F.V. Novikov, Doctor of Sciences, Professor, Kharkiv National Economic University (Ukraine)
(e-mail: fokusnik1@rambler.ru)
I.E. Ivanov, Candidate of Sciences, Pryazovskyi State Technical University (Mariupol, Ukraine)
(e-mail: ivanov@mail.ru)
LAWS OF FORMATION OF MACHINING ERRORS
Theoretically, the regularities of formation of the error of hole machining When drilling conditions and increasing
productivity.
Key words: error handling, holes, reaming, performance.
_________________________
E.А. Kudrjashov, Doctor of Engineering, Professor, Southwest State University (Kursk)
(е-mail: kea-swsu@list.ru)
I.М. Smirnov, Candidate of Sciences, Associate Professor, Director general of JSC NIII (Balashikha,
Moscow region) (е-mail: oaoiii@pochta.ru)
APPLICATION OF A METHOD OF MANAGEMENT BY CUTTING PART OF THE TOOL
FOR INCREASE OF EFFICIENCY OF PROCESS OF FALTERING CUTTING
The technique of definition of optimum conditions of initial contact of cutting part of the tool from a composite
10 (tooth of a face mill) with a processed structurally difficult surface of preparation is presented at face
milling. The method of control over cutting part of the tool from a composite 10 found optimum conditions of
contact with which help increase of operability of the tool and efficiency of process of faltering process of cutting
as a whole is provided. On an example action of a method of management by cutting part of the tool and
advantage of proposed technological solutions before traditionally applied in metal working grinding operations
is shown.
Key words: efficiency, technology, composite, milling, method of management, constructive complexity,
metal working.
_________________________
S.A. Sergeev, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: ssa-cib@yandex.ru)
M.Y. Ivankov, General Director, MGUP «Promotkhody» (Moscow) (e-mail: info@prom-centr.ru)
INDICATORS OF THE QUALITY OF THE DESIGN CHAIN COUPLINGS AND WAYS
OF ITS IMPROVEMENT
Formulates the main ways to improve the quality, design chain couplings, which has been the subject of
further research.
Key words: chain coupling, quality, design.
_________________________
M.S. Razumov, Candidate of Sciences, Senior Lecturer, Southwest State University (Kursk)
(e-mail: mika_1984_@mail.ru)
A.N. Grechuhin, Post-Graduate Student, Southwest State University (Kursk)
(e-mail: agrechuhin@mail.ru)
A.O. Gladyshkin, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: gladfilat@yandex.ru)
I.A. Korolkov, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: kurator57@mail.ru)
A.I. Pykhtin, Candidate of Sciences, Southwest State University (Kursk)
(e-mail: swsu.ee@gmail.com)
CALCULATION AN ALGORITHM DESIGN PROCESS PARAMETERS OF FORMING FACET
SURFACE OF THE BLANKS SPRINGS RAILWAY
An algorithm of calculation of the design parameters of a device for shaping the profile of the spring railway
transport technology and processing parameters.
Key words: algorithm, spring, railway transport, planetary gear.
_________________________
D.B. Belov, Candidate of Sciences, Associate Professor, Tula State University
(e-mail: imsbelov@mail.ru)
E.V. Plahotnikova, Candidate of Sciences, Associate Professor, Tula State University
(e-mail: e_plahotnikova@mail.ru)
METROLOGICAL METHODS OF THE ANALYSIS OF DIVERGENCES OF PARAMETERS
OF SCALE OF DISTRIBUTIONS OF RESULTS OF THE ACCOUNTING OF QUANTITY
OF THE CONSUMED AND PUT RESOURCE
The methods that can be used to the analysis of divergences of parameters of scale of distributions of results
of the accounting of quantity of the consumed and put resource are considered.
Key words: metrological methods, quantity of the consumed and put resource, scale parameters.
_________________________
M.V. Pesin, Candidate of Sciences, Associate Professor, CJSC “Perm oil Machine Engineering
Company” (e-mail: M.Pesin@mail.ru)
SIMULATION OF THE PROCESS OF INTERACTION OF ROLLER WITH THE BOTTOM
OF THREAD OF THE DRILL PIPES
Performed computer simulations of the hardening of the hollow carving deep roll. Provides conceptual
and mathematical formulation of the problem. As a result of a series of numerical experiments using ABAQUS
package evaluation of residual stresses distributions are obtained depending on the degree mounting of the
roll.
Key words: hardening of deep roll thread, residual stresses, finite element method.
_________________________
V.P. Ivanov, Senior Researcher, St. Petersburg Institute for Informatics and Automation of RAS
(e-mail: vpivanov.spb.su@gmail.com)
ACREATION OF QUALIMETRICAL SCALES OF QUALITY BY THE METHOD
OF COMPARATIVE INDICATORS
We present here a creation of qualimetrical scales of quality by the method of comparative indicators. It is
shown that one of possible ways of finding of coefficients of linear convolution of a quality indicator of comparison
of systems (products, objects, etc.) is its ranking relatively some conventional unit. We describe and then consider
a way to mutual expression of results, calculated for a comparison of two systems (groups of objects).
Key words: qualimetrical scales, quality, method of comparative indicators, ranking.
_________________________
A.V. Morozova, Candidate of Sciences, State University – ESPC, Technological Institute named
after N.N. Polikarpov (e-mail: niotiostu@gmail.com)
RATING QUALITY METERING CHARACTERIZATION OF COLLEGES AND ENGINEERING
CURRICULA BY THEM
In the paper the system for the procedure realization of a rating quality metering characterization of colleges
and engineering curricula with the use of factors of the rank correlation and Harrington’s desirability function
is described.
Key words: specialist, competence, Federal state educational standard, category, rank, rating.
_________________________
A.A. Labutin, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(tel.: (4712) 51-33-19)
M.E. Reznik, Student, Southwest State University (Kursk)
DEFINITION OF EFFORT OF DEFORMATIONAT THE SPIRAL STRIPS BENDING
Formulas for determination of the maximum force, lengths of mandrel at spiral bending of a core are suggested.
Key words: tstrip, spiral bending, step, mandrel, force.
_________________________
A.P. Baydiouk, Candidate of Sciences, Associate Professor, South-Russian State Technical
University (Novocherkassk) (е-mail: baidiouk@mail.ru)
M.I. Kovalev, Post-Graduate Student, South-Russian State Technical University (Novocherkassk)
(е-mail: KovalevMI@nevz.com)
V.V. Kuts, Doctor of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: kuc-vadim@yandex.ru)
MATHEMATICAL MODEL OF THE CONDITION CHANGING OF SYSTEM AT DISCRETE QUALITY
MANAGEMENT IN FOUNDRY PRODUCTION
The Markov model of the condition changing for control in special technological process, providing an effective
control to cut down an expense of energy resources and allowing to predict final product quality. For
purpose of process management model of non-stationary temperature field of the foundry equipment is developed.
Key words: quality management, system, foundry production, Markov process, return matrix, probability
of finding of system.
_________________________
N.S. Kobelev, Doctor of Sciences, Professor, Southwest State University (Kursk)
(e-mail: kobelevns@mail.ru)
L.S. Konoreva, Post-Graduate Student, Southwest State University (Kursk)
(e-mail: tanygina-liliya@mail.ru)
SATURATOR AUTOMATIZATION FOR SUGAR BEET PRODUCTION
The model belongs to sugar production, precisely to liquid semiproduct purifier; it can be used in juice purification
and raw sugar melting in various schemes of sugar purification. The disadvantage of the given saturator
is energy-output ratio of carbonation process, established by considerable heat losses through vertical side
of saturator body because of material little total heat resistance and juice boundary layer flow from conoid.
Key words: saturator, dispersion, carbonated gas, perforated septum, elastic membrane, defekovanny
juice.
_________________________
S.A. Danilova, Ph.D., Associate Professor, Southwest State University (Kursk)
(e-mail: kd-39 @ mail.ru)
ON THE DESIGN OF EFFECTIVE MEANS FOR DETERMINING STRESS MEASUREMENT
OF RESISTANCE, AND LONG WAVE HEIGHTS BUCKLING FLAT TEXTILE MATERIALS
The results of the research of the department of design and technology of light industry SWSU aimed at
the creation of special funds for the direct measurement of the characteristics of the buckling of flat textiles for
clothing and mathematical prediction of the key design and technology and performance properties.
Key words: mathematical prediction of the structure of the form, modify the shape and size, confectioning.
_________________________
E.V. Zernov, Candidate of Sciences, Associate Professor, Moscow State University of Instrument
Engineering and Informatics (е-mail: zernov1935@mail.ru)
A.Yu. Albagachiev, Doctor of t Sciences, Professor, Moscow State University of Instrument
Engineering and Informatics (e-mail: Albagachiev @ yandex.ru)
A.M. Moiseenko, Doctor of Sciences, Associate Professor, Orel State Agrarian University
(e-mail: puare54@rambler.ru)
CHANGE OF DEFORMATION AND RATE OF DISPLACEMENT WITH DRAUGHT BILLETS
OF SQUARE SECTION
Article is dedicated to the study of the nature of the change of plastic deformation, depending on the extent
of precipitation and hardening curves. The calculated data obtained by our theoretical dependencies for
speeds of transverse deformations are experimental.
Key words: sludge, plastic deformation, stress, shear deformation, hardening.
_________________________
V.T. Yerofeev, Doctor of Sciences, Professor, Mordovian N.P. Ogarev State University (Saransk)
(tel.: (8342) 48-25-64))
Е.V. Volgina, Lecturer, Mordovian N.P. Ogarev State University (Saransk)
S.V. Kaznacheev, Candidate of Sciences, Associate Professor, Mordovian N.P. Ogarev State
University (Saransk) (e-mail: KaznacheevSV@rambler.ru)
V.M. Kretova, Ph.D., Associate Professor, Southwest State University (Kursk)
(e-mail: 325573@mail.ru)
RESEARCH OF DURABILITY OF THE VINYLESTER COMPOSITES
In article the problem of optimizing the components in vinyl ester composites is composed. The complex
the symmetric three-tiered plan for the second order is composed. On the basis of the composite vinylester
resin, filled kaolin or litopon, with high flexural durability and compressive durability were identified.
Key words: polymer, curing system, kaolin, litopon, flexural durability, compressive durability, regression
equation.
_________________________
S.V. Kaznacheev, Candidate of Sciences, Associate Professor, Mordovian N.P. Ogarev State
University (Saransk) (e-mail: KaznacheevSV@rambler.ru)
V.A. Khudyakov, Candidate of Sciences, Professor, Penza State Technological Academy
A.V. Lazarev, Post-Graduate Student, Mordovian N.P. Ogarev State University (Saransk)
(e-mail: KaznacheevSV@rambler.ru)
V.T. Yerofeev, Doctor of Sciences, Professor, Mordovian N.P. Ogarev State University (Saransk)
(tel.: (8342) 48-25-64))
V.M. Kretova, Ph.D., Associate Professor, Southwest State University (Kursk)
(e-mail: 325573@mail.ru)
RESEARCHES OF EFFICIENCY OF APPLICATION FURFUROLACETONE PITCH
AS A SOFTENER IN EPOXIDE COMPOSITES
Optimization of structures in epoxide composites it is made. It Plan Kono, consisting of 9 experiences
was used. Effective structures of composites on the basis of the epoxide pitch, containing furfurolacetone pitch
as softener are revealed. Composites with high durability indicators and the sufficient module of elasticity are
received.
Key words: epoxide pitch, furfurolacetone pitch, regression equation, durability, module of elasticity.
_________________________
V.I. Kolmykov, Doctor of Sciences, Professor, Southwest State University (Kursk)
(tel.: 8-915-514-70-91)
N.A. Costin, Ph. D., Associate Professor, Kursk State University (Kursk) (tel.: 8-910-311-10-98)
E.V. Trusova, Ph. D., Associate Professor, Kursk State University (Kursk)
V.V. Bedin, Post-Graduate Student, Russian State Agrarian Correspondence University (Balashikha
of Moscow Region)
WEAR NITROTSEMENTOVANNYH LAWS COVERING CR-4 AND OZSH-1 USED
FOR RESTORATION PUNCHIND TOOLS
The characteristic of durability nitrotsementovannyh built-up layers of die steels. Through experiment, dependence
of wear nitrotsementirovannyh deposited layers of steels in the temperature carbonitriding
Key words: surfacing die steels, carbonitriding, wear
_________________________
.M. Chervyakov, Doctor of Sciences, Professor, Southwest State University (Kursk)
(e-mail: chlm@mail.ru)
N.S. Kobelev, Doctor of Sciences, Professor, Southwest State University (Kursk)
(e-mail: kobelevns@mail.ru)
K.N. Zavalishina, Post-Graduate Student, Southwest State University (Kursk)
(e-mail: cris-tinka@yandex.ru)
A.O. Alifanov, Senior Master of the Steam-Turbine Plant of «Quadra» (e-mail: alifanov@mail.ru)
HEATING SYSTEM RESOURCE INDUSTRIAL ENTERPRISES
This paper analyzes the resource consumption heating industry and housing and communal services of
at the Russian Federation, more than 400 thousand tons of standard coal. It was revealed that due to the geographical
location and climatic conditions in the country, the main losses of up to 30% are observed in heat
networks, the length of which is 185 kilometers. Presented by one of the solutions of conservation of heat supply
by reducing the heat loss of the transported fluid through improved thermal insulation properties of thermal
networks.
Key words: heat, heat loss, resource, device heating network.
_________________________
N.V. Horoshilov, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: hnv80@mail.ru)
A.N. Gorlov, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: alexjulia17@ yandex.ru)
V.A. Podchukayev, Doctor of Sciences, Professor, Saratov State Agrarian University named after
N.I. Vavilov
INDICATORS OF MANAGEMENT EFFICIENCY OF ENERGY CONSUMPTION
OF BUILDINGS AND CONSTRUCTIONS
The article considers the indicators of management efficiency of energy consumption of buildings and
constructions.
Key words: efficiency, control, power, algorithm, energy resource.
_________________________
E.G. Pakhomovа, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: egpakhomova@yandex.ru)
E.I. Pakhomov, Deputy Director of the Regional Budgetary Institution «Kurskcitizensproject» (Kursk)
(е-mail: udjinson@rambler.ru)
A.S. Mayakov, Post-Graduate Student, Southwest State University (Kursk)
(е-mail: LeXX8111@ yandex.ru)
A.V. Gordeev, Post-Graduate Student, Southwest State University (Kursk)
(е-mail: gordei_alex@mail.ru)
THE METHODOLOGY FOR EVALUATING THE VIOLATION OF ADHESION BETWEEN VALVE
WITH CONCRETE BY CORROSION DAMAGE OF REINFORCED CONCRETE STRUCTURES
The work is devoted to the development of the method of assessment of violation of the clutch steel and
concrete in reinforced concrete structures, working in the conditions of the effects of aggressive environments
and with damage to the concrete and of the working of the valve.
Key words: adhesion, reinforced concrete constructions, concrete, corrosion damage.
_________________________
V.F. Babkin, Doctor of Sciences, Professor, Voronezh State University of Architecture and Civil
Engineering (е-mail: viovr@yandex.ru)
A.V. Morozov, Post-Graduate Student, Southwest State University (Kursk) (е-mail: viovr@yandex.ru)
RESTATEMENT PERFORMANCE CENTRIFUGAL PUMPS WATER SLURRY
Propose a method of converting characteristics of centrifugal pumps, water visco-plastic suspension,
which is taken as a basis for calculating the coefficient of hydraulic friction, taking into account the rheological
properties of the suspensions. The problem of predicting the performance of centrifugal pumps and pumping
viscous-plastic suspension. For these purposes, the problem of mathematically justified for such fluids in channels
of simple forms and complex .For this, a generalized Reynolds number, which takes into account the viscous-
plastic properties of the suspension.
Key words: pumps, hydraulics, pressure lines, similarity criteria, hydraulic resistance characteristics.
________________________
A.V. Masalov, PhD, Associate Professor, Southwest State University (Kursk)
(e-mail: masalow.al@ya.ru)
V.A. Kabanov, PhD, Associate Professor, Southwest State University (Kursk) (tel.: (4712) 50-53-22)
N.A. Masalov, Student, Southwest State University (Kursk) (tel.: (4712) 52-38-08)
METHOD OF GLUED LAMINATED TIMBER QUALITY TESTS ON FRACTURE TOUGHNESS
Method of glued laminated timber quality tests on fracture toughness is proposed. Several types of specimen
are considered. preliminary fracture toughness parameter values for opening and shear are presented.
Key words: quality control method, crack resistance, glued laminated timber, opening, shear are presented.
_________________________
.G. Novikov, Ph. D., Associate Professor, Institute of Social Education (Branch) of the Russian
State Social University (Kursk) (e-mail: novikov1950sergey@yandex.ru)
R.V. Glagolev, Ph. D., Associate Professor, Institute of Social Education (Branch) of the Russian
State Social University (Kursk) (e-mail: r.glagolev1974@yandex.ru)
V.V. Malihin, Ph. D., Associate Professor, Southwest State University (Kursk)
(e-mail: mtio@kurskstu.ru)
S.A. Sergeyev, Ph. D., Associate Professor, Southwest State University (Kursk)
(e-mail: ssa-cib@yandex.ru)
I.N. Rodionova, Ph. D., Associate Professor, Southwest State University (Kursk)
(e-mail: mtio@kurskstu.ru)
SOLUTION TO REDUCE FLOOD DAMAGE RATIONALE AND PROTECTION
Developed and implemented flexible casing for lengthy engineering flood protection and flood.
Key words: flood, levee flexible, composite material shell.
_________________________
V.S. Maltseva, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: otis@mail.ru)
V.V. Ushin, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: otis@mail.ru)
PROSPECTS OF USING TECHNOGENIC WASTES AS A SORBENT
In this paper we studied technogenic wastes: slag and dust OEMK, leather shavings, scrap of asbestos
slate, waste of sugar manufacture. The possibility of using them for the sorption of waste water from industrial
dyes and ion`s of heavy metal.
Key words: technogenic wastes, sorption, sorbent, wastewater, ions of heavy metal, industrial dyes,
cleaning efficiency.
_________________________
A.F. Vizirenko, Ph.D., Associate Professor, Southwest State University (Kursk)
(е-mail: VizAF51@yandex.ru)
THE INFLUENCE OF ELECTROMAGNETIC FIELDS AND RADIATION ON HUMANS
IN CONJUNCTION WITH OTHER FACTORS OF THE EXTERNAL ENVIRONMENT
The combined impact of unfavourable environmental factors such as electromagnetic radiation of different
nature, including radio frequency range, production factors and the factors of labour can help to increase
the negative manifestations (general morbidity, weakening the immune system, cancer rates, diseases of cardiovascular
system, etc.) for 10-15 years, as most of them have a property called nestahostičeskie
Key words: combined effects of electromagnetic radiation, psycho-emotional sphere, fatigue, active lifestyle.
_________________________
T.V. Polivanovа, Ph. D., Associate Professor, Southwest State University (Kursk)
(е-mail: viovr@yandex.ru)
R.R. Merdeev, Post-Graduate Student, Southwest State University (Kursk)
(е-mail: rinatmerdeev@mail.ru)
STUDY OF MSW LANDFILL WASTE AND ITS IMPACT ON THE UNDERGROUND WATER
Is considered polygon of solid household waste Kurchatov, the impact on Kurchatov water intake, working
on the holdings of the same name of the field.The research of quality of underground waters.
Key words: underground water, landfill, water withdrawals, aquifer.
_________________________
L.A. Vasilevskaya, Candidate of Sciences, Senior Lecturer, Southwest State University (Kursk)
(e-mail: vasilevskaya-la@rambler.ru)
R.G. Prokopenko, Candidate of Sciences, Senior Lecturer, Southwest State University (Kursk)
(e-mail: blondinka-00@list.ru)
MEASURES FOR ARTIFICIAL GROUND WATER RECHARGE IN THE KURSK REGION
In the areas with the shortage of water resources for water supply one must take necessary measures for
artificial groundwater recharge. This involves the transfer of a part of surface recharge to the upper aquifers.
Key words: ground waters, artificial groundwater recharge.
_________________________