2013 N3
(e-mail: abashkin1982@gmail.com)
RESEARCH OF STRUCTURE AND PROPERTIES OF THE ALLOY OF EP202 AFTER HEAT
TREATMENT
In article questions of influence of modes of step aging on structure and properties of complex and alloyed
Ni-Cr of alloys are considered. On the basis of simulation optimum modes of aging were selected.
Key words: heat treatment, step aging, γ1-phase, mathematical simulation.
_________________________
V.I. Kolmykov, Doctor of Sciences, Professor, Southwest State University (Kursk)
(tel.: 8-915-514-70-91)
T.N. Ziborova, Post-Graduate Student, Southwest State University (Kursk) (tel.: 8-910-210-83-66)
A.A. Zhosanov, Post-Graduate Student, Southwest State University (Kursk) (tel.: 8-910-310-04-10)
INCREASE THE ENDURANCE LIMIT FOR STEEL 42HMFA AUTOMOTIVE ENGINE CRANKSHAFTS
LOW TEMPERATURE CARBURIZING
Experimental data on the effect of nitriding steel 42HMFA the durability. It is shown that highly carbonitriding
in a pasty medium at a temperature of 600 ° C for 3...5 hours leads to a significant (~1.5-fold) increase in
fatigue strength steel.
Key words: carburizing, carbonitriding, fatigue strength, yield strength.
_________________________
A.A. Afanasiev, Doctor of Sciences, Professor, Belgorod State Technical University named after
V.G. Shukhov (е-mail: alexaf@mail.ru)
V.N. Gadalov, Doctor of Sciences, Professor, Southwest State University (Kursk)
(e-mail: Gadalov-VN@yndex.ru)
T.N. Rozina, Post-Graduate Student, Southwest State University (Kursk)
(e-mail: gromovatata@mail.ru)
B.N. Kvashnin, Candidate of Sciences, Voronezh State University of Engineering Technology
(e-mail: bobkuk@mail.ru)
SCALING RESISTANCE OF DIFFUSION BORIDE LAYERS COMPLEX COMPOSITION
ON STEEL
There are the results of researches of scaling resistance of steels, hardened with boride coatings complex
composition. They have been obtained by saturation of steel with boron and elements such as chromium,
zirconium, tantalum.
Key words: scaling resistance, boride coatings, diffusion layers of complex composition.
_________________________
О.S. Zubkova, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(е-mail: mtio@kurskstu.ru)
THE SIMULATION OF PRECAST HOLES TO DRILL, EQUIPPED WITH TWO INTERCHANGEABLE
POLYHEDRAL TIPS
The mathematical dependence for determining the surface described by the cutting edges of precast
drills, in the mathematical model projects tirovaniya and manufacture of prefabricated axial tool.
Key words: modeling, axial tool prefabricated drill, graph model, the geometrical parameters, the parameters
of the movement.
_________________________
Y.N. Seleznev, Candidate of Sciences, Southwest State University (Kursk)
(e-mail: mtio@kurskstu.ru)
E.I. Yatsun, Candidate of Sciences, Southwest State University (Kursk)
(e-mail: mtio@kurskstu.ru)
R.N. Khomutov, Post-Graduate Student, Southwest State University (Kursk)
(e-mail: Korshun_87@mail.ru).
METHOD OF PRODUCING MATHEMATICAL MODEL OF TURNING THE PRODUCTS
ON CNC MACHINES
The article describes a method of deriving mathematical models of the process of turning of the processing
of products on CNC machines. Technology machining process is considered as a control object. Received
mathematical models to quantify the degree of influence of various factors on the quality of the process.
Key words: mathematical model, cutting modes, the hardness of the material, the process technology,
allowance, depth of cut, tool life.
_________________________
F.V. Novikov, Doctor of Sciences, Professor, Kharkiv National Economic University (Ukraine)
(e-mail: fokusnik1@rambler.ru)
V.G. Shkurupiy, Candidate of Sciences, Associate Professor, Kharkiv National Economic University
(Ukraine) (e-mail: fokusnik1@rambler.ru)
FORMATION OF METALLIC FILMS ON THE SURFACES OF ARTICLES OF ALUMINUM AND
TITANIUM ALLOYS
The results of studies on the formation of non-metallic films on the surfaces of products from aluminum
and titanium alloys for optical properties of surfaces.
Key words: nonmetallic films, optical properties, aluminum and titanic alloys.
_________________________
A.J. Klochkov, Candidate of Sciences, Associate Professor, Ryazan State Radio Engineering
University (е-mail: baturkin.s.a@rsreu.ru).
N.V. Eliseevа, Candidate of Sciences, deputy head of production nachno-Forsythe (Ryazan)
(е-mail: eliseeva_n@inbox.ru).
S.A. Baturkin, Director of Center for Innovative collaborations, Ryazan State Radio Engineering
University (е-mail: baturkin.s.a@rsreu.ru).
THERMOBAROMETRIC DEPENDENCE OF STRENGTH OF DRY CLUTCH ADHESIVES BASED
ON CARBON NANOTUBES
The results of the analysis depending thermobarometric clutch dry adhesive materials based on carbon
nanotubes. Consider the type of dependence and its parameters. The results of experimental measurements
depending.
Key words: nanomaterials, thermobarometric dependence, adhesive material, carbon nanotube.
_________________________
E.А. Kudrjashov, Doctor of Sciences, Professor, Southwest State University (Kursk)
(е-mail: kea-swsu@list.ru)
I.М. Smirnov, Candidate of Sciences, Associate Professor, Director general of JSC NIII (Balashikha,
Moscow region) (е-mail: oaoiii@pochta.ru)
DEFINITION OF INDICATORS OF QUALITY OF STRUCTURALLY DIFFICULT DETAILS AT FAIR
FACE FREZEROVA-NII THE COMPOSITE-10
Results of research of operability of a face mill equipped with the tool material Composite 10 are presented.
For increase of firmness of the tool on each tooth the edge parallel to a processed surface of the preparation,
a carrying-out role of a zachistny element of cutting part of tooth of a mill is prepared. The problem of a
pilot study is considered on the example of processing of structurally difficult surface of a detail the Insert (the
longitudinal groove creating intermittence are sharp) with definition of the indicators characterizing quality and
efficiency of process with application of a composite-10. Dependence of a roughness of processing of structurally
difficult surface of a detail on change of modes is presented are sharp also the hardness of a material of
preparation. The example of replacement of operation of flat grinding on face milling with use of cutting knifes
from a composite-10 is given.
Key words: technology, composite, milling, constructive complexity, cutting modes, quality of processing.
_________________________
A.A. Labutin, Candidate of Sciences, Professor, Southwest State University (Kursk)
(tel.: (4712) 51-33-19)
N.E. Bykovskaya, Student, Southwest State University (Kursk)
(е-mail: bikovski92@mail.ru)
RIGIDITY OF THE SCHEME OF THE TENSION IN THE NECK AT STRETCHING OF ROUND
SAMPLES
Formulas for determination of radius of curvature in a neck of the exemplar and factor of rigidity, the
stress level condition scheme are offered.
Key words: deformation, destruction, the exemplar, stress level condition.
_________________________
O.B. Fominova, Candidate of Sciences, Associate Professor, Stateuniversity – USIC (Orel)
(e-mail: savin@ostu.ru)
L.A. Savin, Doctor of Sciences, Professor, Stateuniversity – USIC (Orel) (e-mail: savin@ostu.ru)
V.I. Chernyshev, Doctor of Sciences, Professor, Stateuniversity – USIC (Orel)
(e-mail: chernyshev_46@mail.ru)
THEORETICAL ASPECTS OF THE OPTIMAL CONTROLLABLE VIBROPROTECTION PROCESSES
SYNTHESIS
The principle of the minimum and the minimaximum procedure of forming optimum control of the process
of vibro-protection is proved. It is shown, that the direct method of integration of equations of state under the
minimaximum procedure allows, on each step of integration, to find the meaning of components of the optimum
control. The algorithm of minimaximum procedure is used for determining the synthetic functions of controlling
the active system of vibro-protection under the typical restrictions.
Key words: optimum control, synthetic functions of controlling, principle of the minimum, active system of
vibro-protection
_________________________
L.B. Likhachev, Candidate of Sciences, Associate Professor, Voronezh State University
of Engineering Technologies (е-mail: lbmila@ya.ru)
L.I. Nazina, Candidate of Sciences, Associate Professor, Voronezh State University of Engineering
Technologies (е-mail: lbmila@ya.ru)
G.V. Popov, Doctor of Sciences, Professor, Voronezh State University of Engineering Technologies
(е-mail: lbmila@ya.ru)
V.I. Kolmykov, Doctor of Sciences, Professor, Southwest State University (Kursk)
(тел.: (4712) 58-71-04)
DEFINITION AND RISK MANAGEMENT PRODUCT USELESSNESS OF THE FOOD INDUSTRY
Represent a particular risk assessment and food business can develop a risk management program that
is not in demand products to minimize the risk of the company and increase the effectiveness of the quality
management system.
Key words: management of risk, the QMS, risk assessment.
_________________________
L.P. Kuznetsova, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: lubakk8@list.ru)
B.A. Semenikhin, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: borisss@bk.ru)
PROBLEMS OF DEVELOPMENT OF THE MOTOR TRANSPORT WORKING
AT GASEOUS FUEL
Tthe problem of use of alternative gaseous fuels for cars is considered, dynamics of use of gaseous fuels
equipment on vehicles in Kursk is given.
Key words: fuel, gas, gaseous fuels equipment, vehicle.
_________________________
Y.P. Zemskov, Candidate of Sciences, Associate Professor, Voronezh State University
of Engineering Technologies (e-mail: regant2006 @ mail. ru)
B.N. Kvashnin, Candidate of Sciences, Associate Professor, Voronezh State University
of Engineering Technologies (e-mail: regant2006 @ mail. ru)
A.N. Pegina, Candidate of Sciences, Associate Professor, Voronezh State University
of Engineering Technologies (e-mail: regant2006 @ mail. ru)
D.N. Romanenko, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(е-mail: Romanenko-kstu46@yandex.ru)
FOOD QUALITY CONTROL METHOD OF QUALITY FUNCTION DEPLOYMENT (QFD) USING
ON THE PHASE IN THE DEVELOPMENT OF THE STANDARD ORGANIZATION
The results of experience in the techniques of structured quality function in the development of the standard
organization for food production, "oil caviar".
Key words: structured function of quality, the quality of the house, a technique, a manufacturer, a competitor,
the consumer.
_________________________
E.S. Akatov, Post-Graduate Student, Voronezh State University of Engineering Technologies
(e-mail: zhenek-asp@mail.ru)
N.L. Kleimenova, Candidate of Sciences, Associate Professor, Voronezh State University
of Engineering Technologies (e-mail: klesha78@list.ru)
T.I. Igumenova, Candidate of Sciences, Associate Professor, Voronezh State University
of Engineering Technologies (e-mail: regant7@rambler.ru)
D.N. Romanenko, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: Romanenko-kstu46@yandex.ru)
IMPROVEMENT OF QUALITY OF POLYETHYLENE PIPES FOR GAS PIPELINES
WITH NANOCARBON APPLICATION
Essentially new way of improvement of a polymeric material is necessary for achievement in practice of
level of norms and requirements – application of nanocarbon which will allow to raise physicomechanical indicators
of polyethylene, and, therefore, will improve quality of pipes.
Key words: nanomaterials, polymers, fullerenovy soot.
_________________________
E.V. Pavlov, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: evp.kstu@mail.ru)
RESEARCH CONSTRUCTION-TECHNOLOGICAL FEATURES OF BASIC PARTS
OF PNEUMATIC PERCUSSIONS AND ROCK-DESTRUCTION TOOLS
The data of the analysis of structures of base parts of the submersible pneumatic percussions and drilling
tools, the ways of improving technological and operational properties of parts pneumatic percussion drilling are
presented.
Key words: submersible pneumatic percussion, drill bit, construction, operational characteristics, technological.
_________________________
S.N. Zherebtsov, Candidate of Sciences, Associate Professor, Omsk State Pedagogical University
Yu.A. Balakin, Candidate of Sciences, Associate Professor, Moscow State University
of Technologies and Management named after K.G. Razumovskiy
M.I. Gladkov, Candidate of Sciences, Professor, Moscow State University of Mechanical
Engineering
THE THERMODYNAMIC ANALYSIS OF PROCESS OF QUASIEQUILIBRIUM CRYSTALLIZATION
OF FUSION AT MODIFYING IMPACT ON HARDENING METAL
In work the thermodynamic analysis of process of quasiequilibrium crystallization of metal taking into account
modifying impact on fusion is carried out. The analytical formulas of calculation describing stages of process
of a zarodysheobrazovaniye, are given in liquid metal and their physical mechanism. The main equation
of thermodynamics of this process, allowing to estimate technological efficiency of process of modifying of fusion
at a known chemical composition of metal and the modifier is developed.
Key words: thermodynamics, fusion, crystallization, external influence, modifying.
_________________________
N.S. Kobelev, Doctor of Sciences, Professor, Southwest State University (Kursk)
(e-mail: tgv-kstu6@yandex.ru)
A.V. Tokareva, Student, Southwest State University (Kursk) (e-mail: tgv-kstu6@yandex.ru)
V.N. Kobelev, Candidate of Sciences, Senior Lecturer, Southwest State University (Kursk)
(e-mail: tgv-kstu6@yandex.ru)
S.S. Fedorov, Lecturer, Southwest State University (Kursk) (e-mail: tgv-kstu6@yandex.ru)
O.A. Gnezdilova, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: tgv-kstu6@yandex.ru)
ENERGY-SAVING SYSTEM OF HEATING WITH THE LOCALIZATION OF HEAT LOSS
ON EXTERNAL BUILDING STRUCTURES
It shows that, district heating has a substantial drawback of localized heat loss when the heat exchange
of the heating system is located near the outer walling and gives up a significant part of the heat to the surrounding
building environment. Theoretical research and constructive solution that reduces heat loss, betrays
heat exchange on the inner surface of the outer wall of the heated spase.
Key words: heating system, heat loss, heat exchanger, the local heat shield.
_________________________
A.G. Bulgakov, Doctor of Sciences, Professor, Southwest State University (Kursk)
(e-mail: a. bulgakow@gmx.de)
G.E. Tokmakov, Post-Graduate Student, South-Russian State University (Novocherkassk
Polytechnical Institute) (e-mail: tokmakov.tun@gmail.com)
MECHATRONIC SYSTEM FOR EARTH WORKS THE INTELLECTUAL CONSTRUCTION SITE
New developments in the field of artificial intelligence, based on the use of hybrid control structures could
be the basis for the development of mechatronic systems for tracking and management of processing constructions
industry. This approach involves the management of the interaction of working machines, productioncycle
and technology operations.
Key words: artificial intelligence, control and management system, GPS/GLONASS.
_________________________
L.U. Stupishin, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: lusgsh@ya.ru)
M.U. Pereverzev, Post-Graduate Student, Southwest State University (Kursk)
(e-mail: toyotaceres@mail.ru)
A CERTAIN FORCE AT SHALLOW SHELL OF ROTATION OPTIMAL FORM BASED ON
PONTRYAGIN MAXIMUM PRINCIPLE
The distribution of effort in an optimal shape shallow shell of revolution loaded with uniform intensity distribution
is determined. Mathematical model of the optimal form of the shell is based on the Pontryagin,s maximum
principle. Problem is numerically solved by MathCad. Shows the dependence of the distribution of the
longitudinal forces and moments along the radius of the shell.
Key words: shallow shell of revolution, the maximum principle LS Pontryagin optimal shape of the shell,
the force distribution in the shell.
_________________________
A.L. Pozdnyakov, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: dekanov@bk.ru)
PROPOSALS TO ADJUST THE MASTER PLAN ZONE LAND FOR PRODUCTION FACILITIES
IN THE CITY BUILDING FROM THE POSITION BIOSFEROSOVMESTIMOSTI
The paper presents some proposals for adjustment of master plans, areas and sites of production facilities
in the urban areas.
Key words: master plan, urban planning, industrial zone.
_________________________
V.A. Aksenov, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: vladimiraksenov@yande.ru)
O.B. Kotelnikova, Candidate of Sciences, Associate Professor, Kursk State Agricultural Academy
named prof. I.I. Ivanov (tel.: 8-961-196-16-34)
THE ANALYSIS OF THE SOLUTION OF PROBLEMS OF ENSURING MERCURY SAFETY
AT THE ADDRESS WITH ENERGY SAVING LAMPS IN KURSK REGION
The analysis of the solution of problems on ensuring mercury safety is carried out at the address with
compact energy saving lamps in Russia and in Kursk region.
Key words: energy saving lamps, mercury pollution, ecological safety.
_________________________
E.V. Kotenko, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: tgv-kstu6@yandex.ru)
Ye.V. Umerenkov, Lecturer, Southwest State University (Kursk) (e-mail: tgv-kstu6@yandex.ru)
V.I. Kotenko, Post-Graduate Student, Southwest State University (Kursk)
(e-mail: tgv-kstu6@yandex.ru)
ENVIRONMENTAL ASPECTS OF PHASE CHANGING HEAT BATTERIES USAGE
The evaluation of environmental conditions for phase changing heat batteries installation in heat supply
systems with fossil fuel heat sources has been performed.
Key words: heat, heat cumulative material, phase transition, heat accumulator.
_________________________
S.M. Sudarikov, Doctor of Sciences, Professor, Mining University (St.-Petersburg)
(е-mail: sergei_sudarikov@mail.ru)
E.N. Savelieva, Post-Graduate Student, Mining University (St.-Petersburg)
SELECTION OF WATER SOURCE FOR RESERVOIR PRESSURE MAINTENANCE DURING
SMOLNIKOV OILFIELD DEVELOPMENT (VOLGA-URAL OIL AND GAS PROVINCE)
Features of groundwater geochemistry of the Volga-Ural oil and gas province is observed in terms of the
Oudmourtian Smolnikov oilfield. Waters of mid-carbon serpouhov deposits could be used in the reservoir pressure
maintenance during oilfield development.
Key words: oil, groundwater, geochemical indicators, reservoir pressure maintenance.
_________________________
Yu.N. Didenkov, Candidate of Sciences, Associate Professor, Irkutsk State Technical University
(е-mail: didenkov-irk@mail.ru)
Z.V. Chernyshova, Post-Graduate Student, Irkutsk State Technical University
(е-mail: Sphira@rambler.ru)
A.V. Vergun, Post-Graduate Student, Irkutsk State Technical University
(е-mail art-geolog@mail.ru)
V.V. Khaustov, Doctor of Sciences, Professor, Southwestern State University
Southwest State University (Kursk) (е-mail okech@mail.ru)
STRUCTURAL HYDROGEOLOGY OF BAIKAL RIFT SYSTEM
Achieved structural and hydrogeological zoning and compiled the relevant maps of the whole of the
Baikal rift system and its individual parts. The characteristics of the selected hydrogeological structures. The
conditions for the localization of thermal waters and cluster analyzes of the compositions inspired the creation
of new genetic ordering. The results of the research can establish a leading role rift geodynamic regime in the
formation of structural and hydrogeological conditions of the Baikal region, as well as to justify the freshwater
hydrogenic processes of continental rifting.
Key words: structural hydrogeology, rifting, thermal water , cluster -analysis.
_________________________