2013 N2

V.E. Puzanov, Post-Graduate Student, Southwest State University (Kursk)
(e-mail: vadim060587@yandex.ru)
SETTING GOALS MACHINE COMPANY IN THE FIELD OF QUALITY-BASED METHOD
FOR PLANNING PARAMETERS OF QUALITY
This paper presents a method of planning of quality engineering products, allowing the company to set
quality objectives.
Key words: quality objectives, quality planning, dynamics of the quality of products, quality score, the
mathematical model.
_________________________
V.N. Gadalov, Doctor of Sciences, Southwest State University (Kursk)
(е-mail: Gadalov-VN@yandex.ru; tel.: (4712) 50-68-80)
S.G. Emelyanov, Doctor of Sciences, Rector, Southwest State University (Kursk)
(е-mail: rector@swsu.ru; tel.: (4712) 50-48-08)
Y.V. Skripkina, Candidate of Sciences, Senior Lecturer, Southwest State University (Kursk)
(tel.: (4712) 50-45-70)
V.G. Salnikov, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(tel.: (4712) 56-43-29)
V.V. Goretckii, Post-Graduate Student, Voronezh State Technical University
MODIFICATION – THE METHOD OF CONTROL OF STRUCTURE AND PROPERTIES
OF METALS, ALLOYS AND COATINGS
Various methods of modification in order to change the structure and properties of the metal or alloy.
Key words: modifier, metal, alloys, structure and grain.
_________________________
O.L. Morozova, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: morozova-ol@yandex.ru)
D.Y. Zvonarev, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(Kursk) (e-mail: dmzvonarev@yandex.ru)
N.S. Skiba, Undergraduate, Southwest State University (Kursk) (e-mail: swanson666@mail.ru)
METHODICAL ASPECTS OF DEVELOPMENT OF ELEMENTS AUTOMATED QMS
FOR AN INDUSTRIAL ENTERPRISE IN THE FORM OF AN ALGORITHMIC DESCRIPTION
FOR CREATION OF PROGRAM AND APPLIED MODULES
This article is devoted methodical questions of an automated quality management system creation. The
review of software products is provided from the point of view of their use for the control system description.
Key words: quality management system, management automation, algorithm, model, quality management
principles, decision-making.
_________________________
S.V. Pikalov, Candidate of Sciences, Senior Lecturer, Southwest State University (Kursk)
(tel.: (950) 876-87-40)
EVALUATION FRICTION PARAMETER FOR STEPLESS TRANSMISSION
Describes the approach to the maximum friction between the belt and pulley into a continuously variable
transmission. Such an assessment is necessary to accurately determine the maximum transmitted torque and
track the status of the variator. Adaptive estimates are based on the Kalman filter, which estimates the parameters
associated with the maximum friction. The filter does not require a priori knowledge of maximum values
and does not require a detailed model of friction. This method can be used for both intact and damaged to
belts.
Key words: transmission, friction, evaluation, variable.
_________________________
.G. Emelyanov, Doctor of Sciences, Professor, Southwest State University (Kursk)
(e-mail: rio_kursk@mail.ru)
M.S. Razumov, Candidate of Sciences, Senior Lecturer, Southwest State University (Kursk)
(e-mail: mika_1984_@mail.ru)
S.A. Chevychelov, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: tschsa@yandex.ru)
A.N. Grechyhin, Post-Graduate Student, Southwest State University (Kursk)
(e-mail: agrechuhin@mail.com)
A.O. Gladyshkin, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: gladfilat@yandex.ru)
METHOD OF FORMING THE SECTOR PROFILE SPRINGS OF THE RAILWAY CARRIAGES
This paper presents a fundamentally new method for machining the sector profile springs of the railway
carriages.
Key words: railway, the machine turning, the planetary gear.
_________________________
E.A. Kudryashov, Doctor of Sciences, Professor, Southwest State University (Kursk)
(e-mail: rio_kursk@mail.ru)
I.M. Smirnov, Condidate of Sciences, Associate Professor, Southwest State University (Kursk)
(tel.: 8 (4712) 50-48-19)
T.E. Kameneva, Undergraduate, Southwest State University (Kursk) (е-mail: Taska015@mail.ru)
BASIC OPERATIONS AND CHARACTERISTICS OF THE METHODS OF MANUFACTURE
OF THREAD
Presents the results of the classification of threads on the methods of forming and technological characteristics.
Considered the technology of manufacturing of threads as a set of operations prior processing
threads.
Key words: thread, technology of production, mechanical processing methods.
_________________________
A.A. Kotelnikov, Candidate of Sciences, Southwest State University (Kursk)
(e-mail: kotelnikov.anatoliy@mail.ru)
K.I. Abyshev, Post-Graduate Student, Southwest State University (Kursk) (e-mail: mixtery@mail.ru)
E.V. Alpeeva, Student, Southwest State University (Kursk) (e-mail: e.v.alpeeva@mail.ru)
STRESSING CALCULATION OF WELDED CONSTRUCTIONS BY FINITE ELEMENTS METHOD
The article presents the description of stressing calculation of welded constructions by finite elements
method, possibilites of execution of this calculation in SolidWorks and ANSYS Workbench were considered.
Key words: welded constructions, computer simulation, finite elements method, deflected mode.
_________________________
V.A. Bitjukov, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: bitucov.v@mail.ru)
A.V. Tinkova, Candidate of Sciences, Associate Professor, KEMT (e-mail: tinkova_a@mail.ru)
INFLUENCE OF INTERNAL PRESSURE ON RADIUS OF A BEND OF THE ELASTIC PIPELINE
In operation the strains of the elastic algorithm manifold under activity of interior pressure of an incompressible
continuous medium are considered at an arcuation. The settlement formula for definition of underload
radius of the elastic algorithm manifold is obtained at a magnetohydrodynamic mode of a motion of a fluid.
Key words: the elastic pipeline, internal pressure, radial and axial deformation, pressure at a band, the
elasticity module, the minimum radius of a band.
_________________________
B.V. Kavalerov, Doctor of Sciences, Associate Professor, Perm National Research Polytechnic
University (e-mail: kbv@pstu.ru)
G.A. Kilin, Post-Graduate Student, Perm National Research Polytechnic University
(e-mail: thisisforasm@rambler.ru
K.A. Odin, Assistant, Perm National Research Polytechnic University (e-mail: oka54@mail.ru)
FULLY-VARIABLE FAST-SOLVED MODEL OF GAS-TURBINE GAS-DISTRIBUTING
INSTALLATION
In article the model of gas-turbine installation for the gas-distributing unit, received according to supervision
over entrance and output variables on various operating modes is considered. The fully-variable fastsolved
model intends for the organization of procedure of control of a control system of gas-turbine installation.
Key words: control system, mathematical model, identification, interpolation.
_________________________
V.V. Lovtseva, Post-Graduate Student, Penza State Technical University
(е-mail: lowtsewavalia@yandex.ru)
N.D. Tutov, Candidate of Sciences, Southwest State University (Kursk) (e-mail: tutov.n@mail.ru)
ON DEFORMATION OF ELASTIC PIECE OF DOUGH IN A MULTI-ROLLER PASTA MACHINE
WITH CONVEYOR
The article deals with the modeling of the process of dough deformation when rolling it out into a thin layer
in a multi-roller pasta machine.
Key words: dough deformation, a multi-roller pasta machine, conveyor belt.
_________________________
V.G. Kostishin, Doctor of Sciences, Associate Professor, National University of Science and Technology
«MISIS» (Moscow) (е-mail: drvgkostishyn@mail.ru)
V.V. Korovushkin, Doctor of Sciences, National University of Science and Technology «MISIS»
(Moscow) (e-mail: krvsch@mail.ru)@.ru)
L.V. Panin, Candidate of Sciences, Professor, National University of Science and Technology
«MISIS» (Moscow) (e-mail: L.Panina@plymouth.ac.uk)
A.V. Komlev, Post-Graduate Student, National University of Science and Technology «MISIS»
(Moscow) (e-mail: kom_lew@mail.ru)
N.A. Yudanov, Post-Graduate Student, National University of Science and Technology «MISIS»
(Moscow) (e-mail: kolyan2606@mail.ru)
A.Yu. Adamtsov, Post-Graduate Student, National University of Science and Technology «MISIS»
(Moscow) (e-mail: aay1990@gmail.com)
A.N. Nikolaev, Engineer, «Meta-Ferrit» company (Kuznetsk) (e-mail: le_-_ha@mail.ru)
V.G. Andreev, Doctor of Sciences, Professor, Kuznetsk Institute of Information and Management
Technology (e-mail: kiiut@mail.ru)
STRUCTURE AND MNZN-FERRITOVOY PROPERTIES OF THE CERAMICS RECEIVED
BY THE METHOD OF RADIATION AND THERMAL AGGLOMERATION
Results of work on receiving MnZn-ferrite of brand 2500HMC2 by radiation and thermal agglomeration
are given. Influence of basic structure and alloying additive on level of electromagnetic properties of products
after radiation and thermal agglomeration is investigated. It is shown that introduction of oxide of bismuth as a
fusible additive allows to activate agglomeration processes, raising level of properties. By means of messbauerovsky
spectroscopy and the X-ray diffraction analysis regularities of phase transformations in preparations
at radiation and thermal agglomeration are studied. Efficiency of use of surface-active additives for increase
of density of crude preparations and level of parameters is confirmed.
Key words: polycrystalline ferrites, ferrite ceramics, thermal radiation sintering, dopants, Mossbauer
spectroscopy, X-ray analysis, green piece, electromagnetic properties, surfactants.
_________________________
V.G. Kosushkin, Doctor of Sciences, Professor, Bauman Moscow State Technical University
(Kaluga) (е-mail: vic_kos@mail.ru)
S.L. Kozhitov, Candidate of Sciences, National University of Sciences and Technology «MISIS»
(Moscow) (е-mail: kozitov@misis.ru)
L.M. Chervyakov, Doctor of Sciences, Professor, Southwest State University (Kursk)
(e-mail: chlm@mail.ru)
L.V. Kozhitov, Doctor of Sciences, Professor, National University of Sciences and Technology
«MISIS» (Moscow) (е-mail: kozitov@misis.ru)
MODELLING OF TECHNOLOGICAL MODES OF CULTIVATION OF MONOCRYSTALS
OF CONNECTIONS OF AIIIBV BY APPLICATION OF NONLINEAR DYNAMICS
The main goal of the work was the determine of the model approaches for the determination of the parameters
of the process single crystals growth with a given quality in the Czochralski method from a study of
the formation of the real structure of a single crystal.
It is established that the value of the average density of dislocations in the crystal can not be regarded as
an unambiguous criterion of origin or the lack of substructure.
Key words: single crystals of semiconductors, uniformity, the cellular structure.
_________________________
N.S. Kobelev, Doctor of Sciences, Professor, Southwest State University (Kursk)
(e-mail: tgv-kstu6@yandex.ru)
О.А. Gnezdilova, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: gnezdilovakgtu@mail.ru)
V.N. Коbelev, Post-Graduate Student, Southwest State University (Kursk)
(e-mail: tgv-kstu6@yandex.ru)
N.С. Shuteeva, Student, Southwest State University (Kursk) (e-mail: nj3d@mail.ru)
V.G. Semerinov, Student, Southwest State University (Kursk) (e-mail: tgv-kstu6yandex.ru)
THEORETICAL BASES MASS EXCHANGE AND CONSTRUCTIVELY ENERGY SAVING SOLUTION
WALL OF THE PANEL WITH CURVED SURFACES
A theory is described of heatmasstransfer of the ventilated air, saturated by vaporous and finely divided
moisture. A mathematical model presents description of changes temperature of stream of the ventilated air
due to the warmth of evaporated-runback process on the curvilinear ditches of internal surface of panels of
exterior walls.
A structural decision is presented on the basis of aerodynamic calculation of air layer.
Key words: wall panels, ventilated air, heatmasstransfer, evaporation-condensation process, curvilinear
ditches, aerodynamic calculation.
_________________________
I.R. Chekhovskiy, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(tel.: (4712) 52-38-27)
V.A. Zhmakin, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: va-zhmakin@yandex.ru)
T.S. Rozhdestvenskaya, Lecturer, Southwest State University (Kursk) (tel.: (4712) 52-38-14)
BY DETERMINING THE PERFORMANCE VANE INJECTION MACHINES
The authors propose a computational-experimental approach to the determination of the shaft power
blade injection machines, driven in rotation by asynchronous electric motors, with varying load.
Key words: injection machines, asynchronous motor, electric power, rated power, efficiency, total pressure
loss.
_________________________
A.I. Pozdnyakov, Senior Lecturer, Southwest State University (Kursk) (е-mail: viovr@yandex.ru)
V.V. Mojaikin, Senior Lecturer, Southwest State University (Kursk) (е-mail: viovr@yandex.ru)
ASPECTS OF DESING AND OPERETION OF WATER PIPELINES TEAMS WELL WATER INTAKE
OF CENTRAL CHERNOZEMYA
Identify the key issues of design and operation of prefabricated culverts borehole water intakes in the
Central Chernozemya. Formulated three scientific provisions addressing the design and operation of water
pipelines in the context of modular methods of transportation required volumes of water collecting conduits,
piping materials prefabricated culverts and design criteria of design speeds in precast culverts.
Key words: composite conduits, well pumps, wells intakes, lowering stations, water flow rate.
_________________________
V.V. Bredihin, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: bvv001@mail.ru)
PRIORITY ACTIONS IN STIMULATING PROPOSALS FOR THE FORMATION OF MUNICIPAL
HOUSING MARKET FROM A REGIONAL PERSPECTIVE
Analysis of the current state of urban housing environment, identify problems hindering its sustainable
development and objective assessment of the need to transform the process of reproduction of real estate during
the upgrade of the existing building, involves the development of activities to the positive development of
the potential of territorial investment and construction, land and property complexes of the city.
Key words: city, council housing, housing market, integrated development, investment and construction industry.
_________________________
A.L. Pozdnyakov, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: dekanov@bk.ru)
M.A. Tokarev, Student, Southwest State University (Kursk) (e-mail: maxinfo@bk.ru)
O.S. Kashina, Student, Southwest State University (Kursk) (e-mail: lesik-kursk@list.ru)
ABOUT ARKHITEKTRUNA OF THE ORGANIZATION OF THE PRODUCTION ENVIRONMENT
OF THE RECONSTRUCTED ENTERPRISES
The article presents some aspects of architectural organization of the production environment reconstructed
enterprises.
Key words: architectural-building typology construction diagram of the processes, the spatial ensemble,
an architectural ensemble.
_________________________
A.F. Rybochkin, Doctor of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: Anat_ryboch@mail.ru)
A.V. Smirnov, Post-Graduate Student, Southwest State University (Kursk)
(e-mail: innocent046@yandex.ru)
MULTIVARIATE IMPACT OF PARAMETERS OF DIFFERENT NATURE ON THE LIFE
OF BEE-FAMILIES
Multivariate impact on the life of bees is represented. The article contains consideration of possibility of
Colony Collapse Disorder prognostification on assumption of control of influencing factors represented by parameters
of different nature.
Key words: collapse, multivariate impact, vectors of leaving, heavy metals.
_________________________
G.P. Timofeev, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: w261286@yandex.ru)
V.V. Yushin, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: ushinvv@mail.ru)
V.V. Protasov, Candidate of Sciences, Associate Professor, Southwest State University (Kursk)
(e-mail: vladislav-prtasv@rambler.ru)
OPERATIONAL REMOTE FIRE SUPPRESSION AT POWER STATIONS AND NUCLEAR POWER
PLANTS USING SCANNING INSTALLATIONS
We consider the relevance of remote method extinguishing fires in hazardous radiation energy facilities.
A method of fire suppression on the basis of automatic scanning launcher using a forward-looking fire extinguishing
composition, based on a multi chemisorbent.
Key words: heat source, remote quenching, radioactive energy facilities, chemisorbent.
_________________________
E.V. Dubovik, Candidate of Sciences, Senior Scientific Worker of the Agropedology Laboratory
of SSI All-Russia Research Institute of Arable Farming and Soil Erosion Control (Kursk)
(e-mail: vnizem@kursknet.ru)
D.V. Dubovik, Doctor of Sciences, Chief of the Analytical Work Group of SSI All-Russia Research
Institute of Arable Farming and Soil Erosion Control (Kursk) (e-mail: dubovikdm@yandex.ru)
ACCUMULATION OF MACRO- AND MICROELEMENTS BY PLANT ROOT RESIDUES
IN AGROLANDSCAPE
The level of the accumulation of macro- and microelements by plant roots depending on the location in
the landscape was studied. It is established that root biomass accumulating in the soil depends on the slope
exposure and location on the slope. The accumulation of macro- and microelements on the slopes of polar exposures
is differently directed, which is caused by individual peculiarities of element accumulation.
Key words: slope exposure, plant roots, nitrogen, phosphorus, potassium, copper, zinc, manganese,
lead, cadmium, cobalt, nickel.
_________________________